I have a DF to build,I was thinking of using a Lehner 2250/13T on 8 cell lipos but I think it is getting to heavy, I am open for suggestions. Has any body built a DF and if so what was your set up. so I am confused now I think it's to much motor.
I posted on RRR but I will post here too.
I run a Neu 1521 1.5D on 4s, seems to run great. I have seen that hull with the 1521 1.5D on 5s and its BALLISTIC!
Weight is not the problem, as it is probably an advantage with today's power, but that in my oppinion is too much power you are thinking about...run time...props?
I posted on RRR but I will post here too.
I run a Neu 1521 1.5D on 4s, seems to run great. I have seen that hull with the 1521 1.5D on 5s and its BALLISTIC!
This seems to be the popular setup on most 33's and on 4S will approach 60.
Do you plan to race? If so then 4s is the way to go.
BUT... there is something to be said about building a higher-voltage, lower KV motor setup... Less amp draw and longer runtimes being one... There are a couple of decent and inexpensive 6S+ controllers out there that would do the trick, if you are just looking for a nice, fast, reliable sport setup...
Darin E. Jordan - Renton, WA "Self-proclaimed skill-less leader in the hobby."
Comment