jeti jes 600 esc set up help please!

[pmdevlin]

Hi all,
I have this esc, and dont think its getting full throttle, if I use an electronise 40amp esc the motor is revving faster
I noticed that on the net there are black cased and red cased versions of this esc, are there any differences? Mine is the red case, 60amp. It has no audible tones or lights to indicate any set up procedure, anybody got any instructions of set up advice to check full throttle? Other than that it works fine, and just incase there are brushed and brushless versions, it a brushed motor esc
Many thanks

[pmdevlin]

anyone!

[egneg]

I have the red one as well ... I do not believe there is any way to change it.

[bwells]

I have the 60 amp one as well but it is black and has no LED's and as far as I know, it is not programmable. I think you have to go brushless to get the light show and music. Mine was plug and play. P.S. mine is the navy 600, not sure if there is a different one.

[pmdevlin]

thanks guys, I have tried playing with it, stick up when connecting, stick down etc etc, but no set up, the electronize 30 amp one gives more revs, suprising really as I thought jeti where the best!

[marker]

Here's a link to Jeti's manual page.

http://www.jetimodel.cz/data_downloads/17/jes_60_80_100_150_eng.pdf

Mark

[sailr]

Is your esc designed to be used with a stick radio or pistol grip style radio? It makes a BIG difference! The throttle channel travel (timing) is different!

thanks guys, I have tried playing with it, stick up when connecting, stick down etc etc, but no set up, the electronize 30 amp one gives more revs, suprising really as I thought jeti where the best!

[Steven Vaccaro]

Is your esc designed to be used with a stick radio or pistol grip style radio? It makes a BIG difference! The throttle channel travel (timing) is different!

Its designed for pistol radio.