Outrigger websites

[yurkanip]

http://ne-stuff.blogspot.com/2009/12/jae-45hg-pdfs.html

I would say enlarge the jae .45 plans in the link at Niklas's site above...and run it on 6s...would be a fantastic hull to run with nitros.

[Ub Hauled]

Oh OK - If I have trodden on toes then apologies BUT Etti are a store, H&M are a store etc. I do manufacture Outrigger hulls - Will 4, PaynPak kit, U7 1/12th coming, Miss thriftway 1/16th, Van lines 1/16th, Vanlines 1/12th in prototype, Mycro Hydro, Micro Roundnose and Micro Rigger.... all mine.

If I am disqualified then I guess all the others are also

Allan

Allan,
I'll put you in the roster and if anyone says otherwise I'll remove it, but you are right...

[Meniscus]

Jan,

I'm sure you've already seen the site, if it wasn't already mentioned. Here's a link to some of the Japanese riggers that have been mentioned from time to time.

I've also seen the Rattler Outrigger on fleabay, but I wouldn't buy those plans personally.

[Meniscus]

Is there a reason why we aren't including the starship outriggers from minicatracing?

[Meniscus]

What about the old Yellow Jacket plans? I thought they were available at one time? Maybe Jay has them for sale directly.

Others both electric and nitro/gas:

Rico Racing's GX1 Rigger
Aeromarine Stinger Outrigger
Blizzard/Predator Plans (can't remember link)
Insane Rigger (scroll down)
Hurricane Rigger
KX Viper Rigger

RoadRunner Rigger Setup Info

Any chance we can put the models to the right of the link? Some manufacturers or retailers have multiple offerings. It may be helpful to put stock lengths as well. Just some thoughts.

What about the twins out there? I know Jaguar has one or two. I think there are others.
What about Velasco hulls (Ellison if I remember right)?
It may also be worth mentioning Randy does made to order versions custom or from existing molds he has around.

[Ub Hauled]

I looked for the Velasco Rigger, but cannot find a link to it... all good point Ben and noted...
I also made the proper additions to the first post.
I rather not put descriptions and/or suggestions on the first post, that's why the thread is here, so we can talk about it. Thanks for the suggestions.

[RandyatBBY]

I am working on up dates on what I have now, for a lot of the boats I build. I just finished the cat section. Sports were next, now I thinkI do need to up date the composite riggers too.

[Ub Hauled]

Sweet Randy, make sure the website reflects the changes so people can see it.

[Meniscus]

Velasco Hulls

Statement from Dan Ellison on another forum: "There is a picture of the gas r/c rigger under results for G-1 hydro on the namba website, 07 nationals . It is an epoxy glass gas rigger,44 inches long, under 10lbs RTR. Limited availability through Velasco's hulls in CA."

I hope that helps. Regarding descriptions and/or suggestions, I see your point and I'm inclined to agree. It would be nice though to see the model names listed for each site or manufacturer, but again, the info is there to find and it's ultimately up to the reader. LOL

[properchopper]

I hang out with Henry Velasco at Legg Lake when he's there, usually a few times a month. What a super guy, a legend in the Hot Rod world, and has some faassst riggers. I'll check with him next time I see him & see what riggers he has; his site only shows scale hydros & stuff.

[Meniscus]

Tony, that sounds good, I'd be interested in finding out what he's offering.


Jan, here's another for you. It wasn't easy, but here it is, translated no less for convenience: Team Triple RC Boats (Japan)

[properchopper]

BTW, I recently watched Mark & Chris Grim testing a brand new rigger that, from what I understood, they designed and Brian built for them. FG tub & sponsons, beautifully struck out, big gasser size. Ran Sweet !!

[Meniscus]

Do you know if they are going into production?

Jan,
Link to Predator Plans or here
Jay Turner's Yellow Jacket Plans
Emmanuel DELIAS (ED66677) Outrigger Plans (scroll to very bottom)

[properchopper]

Do you know if they are going into production?

I don't know for sure, but the boat looked just like it came out of Brians mold; beautifully done. I'll be dropping by the Grims in the next few days may find out more.

[raptor347]

Yes, they are in production.

Big parts, bigger molds