Tweet
Building two etti demons. The servos I have right now are causing installation issues because of their thickness. I was going to use hitec 8775mg servos. They have 100 oz in tq. Do I need that much? Or can I use the little savox micro waterproof servo?
-
32" carbon rivercat single 4s 102mph, 27” mini Rivercat 92mph, kbb34 91mph, jessej micro cat(too fast) was -
In my Etti Demoni used a Hs524mg servo
Sent from my iPhone using Tapatalk -
Is that an old number? All I could find was a 5245mg servo....32" carbon rivercat single 4s 102mph, 27” mini Rivercat 92mph, kbb34 91mph, jessej micro cat(too fast) wasComment
-
Anything above 3kg torque will be enough. The last time I installed a Turnigy metal body mini digital (not very good, the casing has an opening and it takes water...) and it was more than enough. Just don't go crazy with the rudder: it likes a shorter wider blade.Comment
-
Etti demon rigger minimum servo tq?
WOW that was bad gramma haha. HS5245MG servo
Sent from my iPhone using TapatalkLast edited by StevenBryant; 12-16-2015, 02:55 PM.Comment
-
Thanks fellas32" carbon rivercat single 4s 102mph, 27” mini Rivercat 92mph, kbb34 91mph, jessej micro cat(too fast) wasComment
Comment