Receiver Battery, Confused as hell

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Apples1
    Senior Member
    • Dec 2007
    • 406

    #1

    Receiver Battery, Confused as hell

    I am running a hydra 240 and a neu 2215 with a futaba 3pm radio, do i need a reciever pack? if so what type or can i add a bec?

    Not sure what to do

    Thanks Guys
    returning to boats after a big break
  • Bill-SOCAL
    Fast Electric Addict!
    • Nov 2007
    • 1404

    #2
    Big motors and high voltage usually run separate receiver packs.

    Disconnect the red wire from the ESC to the RX. Then use a 5-cell NiMH pack with its own switch between the pack and RX.

    I use this set up on every boat except my SV27 powered boats. There I use the built in BEC on the ESC.
    Don't get me started

    Comment

    • Apples1
      Senior Member
      • Dec 2007
      • 406

      #3
      will i need any special connectors or charging leads?
      returning to boats after a big break

      Comment

      • calcagno45
        Fast Electric Addict!
        • Mar 2008
        • 1006

        #4
        Just a lead to plug the Rx battery in. My charger had on in the package deal.
        My prop hasn't been wet in a while.

        Comment

        • mike martin
          Senior Member
          • Oct 2007
          • 273

          #5
          is it a HV 240 or a hydra 240

          Comment

          • Apples1
            Senior Member
            • Dec 2007
            • 406

            #6
            hydra 240 not the HV one
            returning to boats after a big break

            Comment

            • mtgoat
              Member
              • Apr 2008
              • 81

              #7
              Here's a cool thing:

              Comment

              Working...