Arming 60 amp AQ esc with Futaba 3 PK r603ff receiver

[grayhamby]

This has probably been answered here before but how does one arm the Aquacraft 60 amp esc with a Fut 3 PK wheel and a r603ff receiver? What beeps to expect etc. Battery is Turnigy nano 5000mah 35~70c. Thanks for the help. Graydds

[tlandauer]

The arming of this ESC is different than most in it that you plug in the battery first, ( with transmitter on, that is) wait for one single beep, then pull trigger to full throttle, wait for another single beep, immidiately release trigger, three beeps will follow and you are in bussiness.
YOU NEED TO DO THAT FOR EVERY TIME YOU DISCONNECT AND RECONNECT BATTERIES!

[tlandauer]

You have to have 4s minimum, and the three beeps confirming the arming has nothing to do with cell count!