Swordfish 120/Airtronics Calibration Problem

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Insaniac
    Senior Member
    • Jul 2010
    • 423
    #1

    Swordfish 120/Airtronics Calibration Problem

    I'm trying to "calibrate" a Swordfish 120 with an Airtronics MX-Sport and the throttle only comes on if I push the trigger forward...I've got two other Swordfish ESC's I use with this MX-Sport and never had this setup problem before.
    Any ideas?

    Update: Found Channel 2 Reverse...it was hidden in the Channel 1 menu...helps if you read the darn manual...LOL!
    Last edited by Insaniac; 10-15-2011, 11:04 PM.
    Support US hobby suppliers
    Tags: None
    • drwayne
      Fast Electric Addict!
      • May 2008
      • 2981
      #2
      assume you are programming a new model # into the Tx ... fwd/rev servo default may be wrong.. try rev the channel.
      Wayne Schutte PhdCSE BaSE BaEE. Australian, & damn proud of it YOUTUBE
      @ 36" H&M Maritmo twin1512/1800 6S1P 88mph @ 40" drag hydro#1 twin 5692 12S1P .....always for fun @

        Comment

        • sanyijr
          Senior Member
          • Oct 2008
          • 376
          #3
          Originally posted by Insaniac
          Update: Found Channel 2 Reverse...it was hidden in the Channel 1 menu...helps if you read the darn manual...LOL!
          I know when I am frustrated and cannot figure things out, as a last resort, I turn to the instruction as well.

            Comment

            Previous template Next
            Working...