BBY New radio ?

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • RandyatBBY
    Fast Electric Addict!
    • Sep 2007
    • 3915

    #1

    BBY New radio ?

    I just bought a new DX3R will it bind to the old Spektrum recievers and work?
    Randy
    For ABS, Fiberglass, Carbon hulls and Stainless hardware
    BBY Racing
  • RandyatBBY
    Fast Electric Addict!
    • Sep 2007
    • 3915

    #2
    I think I will like the model match that prevents model to not be able to run, unless it is on the right receiver and model memory is setup for that receiver.
    Randy
    For ABS, Fiberglass, Carbon hulls and Stainless hardware
    BBY Racing

    Comment

    • JimClark
      Fast Electric Addict!
      • Apr 2007
      • 5907

      #3
      I would think they would be backward compatible
      "Our society strives to avoid any possibility of offending anyone except God.
      Billy Graham

      Comment

      • RandyatBBY
        Fast Electric Addict!
        • Sep 2007
        • 3915

        #4
        Originally posted by JimClark
        I would think they would be backward compatible
        The new transmitter will bind to both old and new recievers. And the DX3R will bind to the old Spektrum recievers and work.

        But the old transmitter will not bind to the new receiver.

        Thanks for your input.

        I am still learning more each day on this radio transmitter they talk back and forth.
        Randy
        For ABS, Fiberglass, Carbon hulls and Stainless hardware
        BBY Racing

        Comment

        • JimClark
          Fast Electric Addict!
          • Apr 2007
          • 5907

          #5
          right the old tx will not work with the new recievers
          "Our society strives to avoid any possibility of offending anyone except God.
          Billy Graham

          Comment

          • Darin Jordan
            Fast Electric Addict!
            • Apr 2007
            • 8335

            #6
            Unfortunately, your new DX3R TX will NOT work with the New MARINE (MR3000 or MR200) RX's...

            If you are using the SR-series RXs in boats, just make sure that you mount the RX with the antenna up as HIGH as you can get it. I've NEVER had an issue using the SR3100 RXs in boats, but I have seen others who have.
            Darin E. Jordan - Renton, WA
            "Self-proclaimed skill-less leader in the hobby."

            Comment

            • RandyatBBY
              Fast Electric Addict!
              • Sep 2007
              • 3915

              #7
              Originally posted by Darin Jordan
              Unfortunately, your new DX3R TX will NOT work with the New MARINE (MR3000 or MR200) RX's...

              If you are using the SR-series RXs in boats, just make sure that you mount the RX with the antenna up as HIGH as you can get it. I've NEVER had an issue using the SR3100 RXs in boats, but I have seen others who have.
              I am not sure you are correct my DX3R will use any DSM2 technology but is also compatible with most DSM1 Spektrum surface receivers. It does work faster with the DSM2 receiver like the AR3100. I will have to read more to be sure, My transmitter has a learning feature that is interesting.
              Randy
              For ABS, Fiberglass, Carbon hulls and Stainless hardware
              BBY Racing

              Comment

              • Steven Vaccaro
                Administrator
                • Apr 2007
                • 8721

                #8
                Originally posted by RandyatBBY
                I am not sure you are correct my DX3R will use any DSM2 technology but is also compatible with most DSM1 Spektrum surface receivers. It does work faster with the DSM2 receiver like the AR3100. I will have to read more to be sure, My transmitter has a learning feature that is interesting.
                Randy, if it doesn't have the Marine Logo, it will not bind with marine rx's. I'm personally frothing at the mouth for the new DX3r version that will work with Marine.
                Steven Vaccaro

                Where Racing on a Budget is a Reality!

                Comment

                • Darin Jordan
                  Fast Electric Addict!
                  • Apr 2007
                  • 8335

                  #9
                  Originally posted by RandyatBBY
                  I am not sure you are correct my DX3R will use any DSM2 technology but is also compatible with most DSM1 Spektrum surface receivers. It does work faster with the DSM2 receiver like the AR3100. I will have to read more to be sure, My transmitter has a learning feature that is interesting.
                  Randy... I'm a Spektrum sponsored racer, who also does testing for all of their marine products... I assure you that I am correct...

                  The DX3R is not currently compatible with the MR-series RXs... If the TX does not have the marine logo on it...



                  Then it's not compatible, and Spektrum has NOT released a DX3R that has the marine logo on it at this point.

                  I have asked about it and it's not in the works at this time.

                  The following TX's are currently compatible with the Marine line of RXs:

                  Compatible Surface Transmitters (must have Marine logo):
                  DX3S (SPM3140)
                  DX2S (SPM2120)
                  DX3E (SPM3160)
                  new DX2.0 (SPM20220)*
                  new DX3.0 (SPM20320)*

                  *Please note: Earlier versions of the DX2.0 (SPM20200, SPM20210), DX3.0 (SPM20300, SPM20310), and DX3S (SPM3130) are not compatible with the MR3000.

                  Compatible Aircraft Transmitters:
                  JR12X
                  JRX9303
                  Spektrum DX8
                  Spektrum DX7
                  Spektrum DX7se
                  Spektrum DX6i
                  Spektrum DX5e
                  Spektrum DSM2 Aircraft Module Systems



                  I can assure you that, as soon as they do release something new that is Marine compatible, I'll be the first one out here to tell everyone about it!
                  Darin E. Jordan - Renton, WA
                  "Self-proclaimed skill-less leader in the hobby."

                  Comment

                  • RandyatBBY
                    Fast Electric Addict!
                    • Sep 2007
                    • 3915

                    #10
                    Originally posted by Steven Vaccaro
                    Randy, if it doesn't have the Marine Logo, it will not bind with marine rx's. I'm personally frothing at the mouth for the new DX3r version that will work with Marine.
                    Good to know, I will be looking at/for transmitters with the marine logo before I buy a Marine receiver.
                    Randy
                    For ABS, Fiberglass, Carbon hulls and Stainless hardware
                    BBY Racing

                    Comment

                    • RandyatBBY
                      Fast Electric Addict!
                      • Sep 2007
                      • 3915

                      #11
                      Originally posted by Darin Jordan
                      Randy... I'm a Spektrum sponsored racer, who also does testing for all of their marine products... I assure you that I am correct...

                      The DX3R is not currently compatible with the MR-series RXs... If the TX does not have the marine logo on it...



                      Then it's not compatible, and Spektrum has NOT released a DX3R that has the marine logo on it at this point.

                      I have asked about it and it's not in the works at this time.

                      The following TX's are currently compatible with the Marine line of RXs:

                      Compatible Surface Transmitters (must have Marine logo):
                      DX3S (SPM3140)
                      DX2S (SPM2120)
                      DX3E (SPM3160)
                      new DX2.0 (SPM20220)*
                      new DX3.0 (SPM20320)*

                      *Please note: Earlier versions of the DX2.0 (SPM20200, SPM20210), DX3.0 (SPM20300, SPM20310), and DX3S (SPM3130) are not compatible with the MR3000.

                      Compatible Aircraft Transmitters:
                      JR12X
                      JRX9303
                      Spektrum DX8
                      Spektrum DX7
                      Spektrum DX7se
                      Spektrum DX6i
                      Spektrum DX5e
                      Spektrum DSM2 Aircraft Module Systems



                      I can assure you that, as soon as they do release something new that is Marine compatible, I'll be the first one out here to tell everyone about it!
                      Thanks for the info, I am still sorting this out. I know you are as accurate as possible. Thanks again.
                      Randy
                      For ABS, Fiberglass, Carbon hulls and Stainless hardware
                      BBY Racing

                      Comment

                      Working...