Advice please: Motor for blackjack 24

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Grubb595
    Junior Member
    • Dec 2019
    • 5

    #1

    Advice please: Motor for blackjack 24

    Hi,
    Looking for advice on faster motor for Blackjack 24. I am only vaguely familiar with kv,etc. but was hoping there was a relatively cheap way to upgrade the motor (it's broken - long story) and hopefully it would just be a drop in for a small increase in speed. I already have an 80 amp ESC (for 3 cell)and understand I would probably need a cooling jacket and maybe motor mount. But if someone could please simply name a specific motor and related parts with stock prop hopefully, that would work in there I would be eternally grateful. I asked Steve and he might as well have been explaining how to start a B-767. Please keep it simple - Thanks
  • fweasel
    master of some
    • Jul 2016
    • 4285

    #2
    I put in the Dynamite 3910 6pole 2000kv motor from the blackjack 29 back when I had a Blackjack 24. That motor has since been replaced with the 3831, so you can probably find a used one for cheap.
    Vac-U-Tug Jr (13mph)

    Comment

    • Grubb595
      Junior Member
      • Dec 2019
      • 5

      #3
      Great! Thanks for your answer!

      Comment

      • Grubb595
        Junior Member
        • Dec 2019
        • 5

        #4
        Hi,
        Would you happen to know if that will fit the stock shaft and prop?
        Thanks

        Comment

        • Grubb595
          Junior Member
          • Dec 2019
          • 5

          #5
          The 3831 that is.

          Comment

          • fweasel
            master of some
            • Jul 2016
            • 4285

            #6
            The stock motor is a 5mm shaft, so the stock collet will fit both a 3910 and 3831 motor.
            Vac-U-Tug Jr (13mph)

            Comment

            • Grubb595
              Junior Member
              • Dec 2019
              • 5

              #7
              Awesome! Thanks a million for your reply.

              Comment

              Working...