Yes, that's about where the balance point is. I took another look at the transom; it's angled down, so therefore doesn't give the stinger as much room to angle up as if it was flat. I'll try adding some washers to the bottom bolts and see if the extra angle I get out of it helps. Thanks!
Prop KV and amp draw help
Collapse
X
-
Yes, that's about where the balance point is. I took another look at the transom; it's angled down, so therefore doesn't give the stinger as much room to angle up as if it was flat. I'll try adding some washers to the bottom bolts and see if the extra angle I get out of it helps. Thanks!Comment
Comment