Turnigy AquaStar 4084 1050 KV

[tebby2]

Does anyone have experience with this HK motor? Is it junk or would it out perform a Leo 4074 1050 KV motor and be close to the performance of performance Leo 4082 1000KV motor?

I will be planning a fairly heavy 42" downeast hull in the 20 mph range on either a 2S or 3S 8000 mAh Lipo battery I will be using with a Prop Shop (Swan Castings, UK) 2.5"D x 2.75"P 3 blade standard prop. This prop and battery set up works well with a Leo 4082 1250 motor, but I'm looking to increase run time with lower amps.


Charlie

[Speed3]

It should work. You might get 40% more runtime. If you was getting 10 minutes with the 1250kv leopard you might get 14 minutes.