Timing suggestions

[Modified RC]

Hello all, I have a question on the best timing setting for two TP3630 motors (Actual size 36 x 61)

One is 3267kv 6D

The other is 2540kv 4Y

Both motors will be run by the OSE Raider 150 amp escs.

My timing choices are: 0 / 3.75 / 11.25 / 15 / 18.75 / 22.5 / 26.25

Thank you for any help you can provide,

John

[jim82]

"D" 0-3.75 and "Y" 10-15

[Modified RC]

Thank you Jim