CZ series II 6 pole motor

[RunningBeer]

Hi Skippers, I am interested in this motor http://tenshock-motors.de/Tenshock-B...ole-TSCZ2250_1 in the 2130KV version for a 4S set up. Has anyone had any experience with these they could share? Also for this motor I can't find a maximum amp recommendation anywhere. No reply from Tenshock as yet. All opinions are greatly appreciated as alwats.
R.B.

[jkr]

I have worked a czii2250 2560kv on 4s m445.
First run hit 60mph...
Very strong motors with high efficiency.

[RunningBeer]

Thanks jkr, What hull was that? and did you have any idea of the amps?
RB

[jkr]

Can't say about the amps.
Hull was a pursuit that was sended to me for reinforcement and upgrade.
I also have an other one waiting on the self.

[Heath M]

I have worked a czii2250 2560kv on 4s m445.
First run hit 60mph...
Very strong motors with high efficiency.

Hi was that a race setup or just for speed runs? I've been eying these motors off for awhile now.

[jkr]

It was just a fast setup as we don't have the same type of races here but i dont thing you will have any problem running it on race.
Very compact motors and ste wire one the stator is very very tight.Also tey like high timming as they are 6pol.

[RunningBeer]

..I've been trying to get a response from Tenshock re. max amps but aren't having much luck. The other thing I would like to know, is what is the outside diameter of the cooler for this motor? I get an e-mail from them acknowledging the inquiry, but no more.
...Thanks for the input, I'm eying off one of these as well. RB