Volume order for tp 3630 1950

[DPeterson]

Due to the interest and wanting to go into the next season with an inventory I am going to do one more volume order of the TP 3630 1950. After that we'll ask Steve if he wants to carry this one in stock. This TP 3630 1950 was "water tested" along side the AQ 2030 and was found to be very close in performance. And we believe it will be longlasting.

These motors will be $75.00 shipped. $85.00 if you want the cooler.

I will be placing this order around January 12. Let me know here if you want to be added to the list.

Please - this thread is not a NAMBA P-Limited rules debate. The debates are over. We are a group of guy's taking a different direction. We are focused on more choices with better motors. If you too wish to be proactive - order a motor.

Doug

[rickwess]

Hi Doug. Do you know if Dave@HRC is machining coolers for these yet?

[DPeterson]

rickwess

No - I do not know. Can you do us a favor and find this out? :)

Doug

[T.S.Davis]

Doug, put me on the list please.

[80mac]

Doug, I would like 2 with the coolers please.

[rickwess]

rickwess

No - I do not know. Can you do us a favor and find this out? :)

Doug

Dave does make a 36x50 cooler that is meant for the AQ motors. I've emailed him and he'll look into the TP36xx sizing.

[Steven Vaccaro]

I have some on order.

[jaike5]

Hi Doug,
Put me down for two with water jackets.
Cheers, Jay.

[DPeterson]

rickwess - thanks for checking on this. The TP cooler is a little short on water volume. The good thing IMO is that the motor looks as though it can take a little heat.

Steve - thanks for adding the motor to your shop offerings. I promise this will be my last motor offer. I don't wish to be in the motor supply business.

Terry - thanks for at least looking at the motor. I know it had to be a little hard for you.

I really do believe that by focusing on "more choices", "better motors" and "tech approved" by "on water" testing that we can put an end to this 3 year electric plague we all suffer.

Whats the 3 year electric plague? Seems every 3 years on average we have to re-tool. Alot of us are sick of it. 05 motors to 700 motors to quality brushed motors to rtr motors. The rtr motors take a crap and now we are back at it. We are going to get it right this time. We are going to find motors from multiple suppliers that meet our "on water" objectives for Spec motor classes.

Cheers - Doug

[Doby]

Put me down for another one with a cooler Douggie.

[LiPo Power]

Same here, I'll like one with cooler please..

[Steven Vaccaro]

Steve - thanks for adding the motor to your shop offerings. I promise this will be my last motor offer. I don't wish to be in the motor supply business.

No problem Doug. Im just piggy backing off your testing. I figured if you tested it, it should be a keeper.

[ray schrauwen]

I would like one too please Doug. Ship it with Doby's and we'll split the costs. No cooler for me please, I've got quite a few spare coolers laying around.

Put me down for another one with a cooler Douggie.

Thank you and hope your Christmas was nice.

[LiPo Power]

Ray, motors are $75.00 shipped...

[ray schrauwen]

Cool. thx.