Help! Lehner bearing replacement

[oscarel]

How do you get a Lehner 3060 apart to replace the bearings??

[Fluid]

As I recall the PTO end screws off...but it's opposite thread (lefty tighty). Mount the motor to a length of 1/8" aliminum with the motor screws, grab the motor housing and turn it off. That's how I remember anyway...


.


.

[oscarel]

Thanks Jay, will give it a try.

[RaceMechaniX]

Honestly it is much easier if you have the right tools. A good friend made me a set of squeeze wrenches exactly for 19, 22 and 30 series Lehners. If you are willing to send me the motor I can do this for you.
DSC01612.jpgDSC01615.jpg
Tyler

[oscarel]

Honestly it is much easier if you have the right tools. A good friend made me a set of squeeze wrenches exactly for 19, 22 and 30 series Lehners. If you are willing to send me the motor I can do this for you.
[ATTACH=CONFIG]120568[/ATTACH][ATTACH=CONFIG]120569[/ATTACH]
Tyler

Tyler, that would be great!!! If you don't mind PM me your address. Thanks!!!

[oscarel]

Tyler, I can't thank you enough for replacing the bearings for me. This is what makes this forum and sport such a great thing! If there's ever anything I can do to help you please don't hesitate to ask!

Oscar

[Mike Caruso]

Honestly it is much easier if you have the right tools. A good friend made me a set of squeeze wrenches exactly for 19, 22 and 30 series Lehners. If you are willing to send me the motor I can do this for you.
[ATTACH=CONFIG]120568[/ATTACH][ATTACH=CONFIG]120569[/ATTACH]
Tyler

Nice tools and love the effective connectors. Where do your order you motors?
Mike

[RaceMechaniX]

Happy to help Oscar.

Mike, you can order the motor directly from Lehner. Brian Watts at Rocket city racing also can order them if you prefer to use a US dealer. Prices are very similar.

Tyler