Timing for leopard 4092

[Banzee]

What is the best timing for a leopard 4092 1390 kv 2Y motor on a seaking 180a esc mount in a 36 inch mono ?

[Heaving Earth]

11-15 degrees

[Banzee]

Thank's

[jimjacobsen]

Just setting up a Dumas 7.5 Rigger (36") with a new Leopard 4092-1730kv and a 180A Seaking ESC. Is the timing setting same as the mono above? 11-15 ?
Thanks in advance for your help..

[martin]

The 4092 - 1730kv is a D wind motor,on a Seaking 180a set to 3.75 degrees.

[jimjacobsen]

My knowledge on timing is enough to fill a thimble. Is there a thread I could go to enabling me to become more knowledgeable on timing? My motor insert sheet shows 3.75%
would indicate 2 cell batteries while I really will be running at least 4 cell. (to start, that is)

[martin]

Your reading the sheet wrong, each line is a separate setting ie the 3.75 degrees setting has nothing to do with the cell count line of settings.

[jimjacobsen]

I get it now. I need to educate myself more. I just found a website which is very good on timing. There is a lot to it and is very important to properly understand.
Thanks for the quick answer and help.