Neu motor dimension

[grsboats]

I need to know the out diameter of the 1527 can motor.Thanks Gill

[KartRacer]

http://www.neumotors.com/Site/Welcome.html

Will this help?

[Fluid]

My 2011-vintage 1527/0.5Y has an outer diameter of 1.579" or 40.1 mm.


.

[RaceMechaniX]

Gil,

It will depend on the "vintage" of motor. I have found that the older style two-piece can's almost always have a 39mm can diameter, where as the newer style cans with three-piece design have a 40mm diameter. Today the 1506-1515's still have a 39mm can diameter, but 1521-1530's have 40mm can diameter.

Tyler

[Fluid]

I wish it was that easy Tyler. My 2009-vintage 2-piece 1527/1.5D measures 1.575" or 40.00 mm. Actually all of my 1527s are nominally 40mm.



.

[RaceMechaniX]

I have a 2007 1527 that measures 39mm. It has the output side and can machined as a single piece like the current 1515's.

[Fluid]

I guess what matters is the motor the OP has.....



.

[grsboats]

The motor is the one Ose is selling now... .5Y 2500kv.....if it's 40mm I have the water jacket for it...otherwise will have to buy a new one.Thanks Gill

[RaceMechaniX]

Gill,

It will be 40mm.

TG

[grsboats]

Thanks a lot guys.Gill