Leopard 4092 700kv

[sampit]

Any ideas guys what hull I could use to run a Leopard 4092 700kv motor in? looking to buy a new mono or cat hull, I have a FC 16s 200A esc that I would like to use
Also have 4 new x Dinogy 5000mAh 65c 6s packs not sure if to go 12s 1p or heavy weight 12s2p

[sampit]

DF 41 maybe?

[Mattwarner]

I'd do that Sam, I might run a similar setup in a as my next build although have to ask how come the new project? How's the zonda doing?

[sampit]

Sold the Zonda Mat a few week back.

[sampit]

still looking for a bit off help Guys!

[Alfa Spirit]

Try a 50" FOUNTAIN

[ray schrauwen]

If you build it..... people will listen

Try a 50" FOUNTAIN

[/IMG]

[iamandrew]

Alfa, you are on the verge of spam
every time someone asks you why you haven't built a boat, you don't have any answers, just "im waiting on a bolt and a nutt, there for i cannot do any work on the boat"
is this Fountain running yet? its been a few months since you posted it

[Mattwarner]

50" fountain
Mmp rapid
Ekos p1
Pursuit twin
Genesis twin

Hulls, hardware and stickers and not a single hole drilled!

[iridebikes247]

Funny that boat has a lot of decals in areas that would cause a big issue if hatch tape were ever put down. These boats were never intended to be run there is no clear coat on the hull either. I DO like that Fountain hull though and the decals the hull is only like 120 bucks without shipping on ebay pretty awesome deal if you're in the market for a 50" deep vee.

[lenny]

Yes it would be nice,
To see one running in the water at cruising speeds.