Need help with UL-1 Motor.

[tjw4700]

I'm looking at getting a UL-1 Motor for a Tunnel Hull as Randy from BBY suggested that Motor and said that's what he run's in all his Tunnel Hulls that are around 27 inchs long.

What I was wondering is what s the max timing you can adjust this motor to.

[JimClark]

What ESC

[Fluid]

The max timing will depend on the use. The more amps you pull the more timing the motor needs. Stock timing is 10*, I've run 15* on the motor with a small performance improvement but if you do that watch for heat issues. As Jim alludes to above, the ESC determines the exact timing value you can choose.


.

[tjw4700]

I'll be running it on 14.8 Volt's and a Seaking 180 ESC.