WOoOAAHAHA BABY!!!! new HK Motor

[iamandrew]

http://www.hobbyking.com/hobbyking/s...ess_Motor.html

[sampit]

Good find
I just bought a Leopard 4092 700kv a few hours ago, looks like this would have been a better buy oh well.
maybe not its a bit big for me at 63mm x 102mm

[Basstronics]

Hmmm to buy or not to buy, this is the question.

Probably one of those things HK wont sell again after initial stock runs out.

[Fluid]

Want to bet it's a 2-pole motor like the Lehner it's a copy of?



.

[Brushless55]

I think a few have bought one to try out..
In this thread
http://forums.offshoreelectrics.com/...479#post450479

[T.S.Davis]

So similar to a 3060/5......ish. Bit smaller dia. Has to be two pole.

I suppose at $98 you could afford to guess wrong.

[Basstronics]

Im going to sit this one out.

[Brushless55]

So similar to a 3060/5......ish. Bit smaller dia. Has to be two pole.

I suppose at $98 you could afford to guess wrong.

I see 4 pole on the skyrc site

http://www.skyrc.com/index.php?route=product/product&path=39&product_id=140

[Make-a-Wake]

They are these..............or these are they.......................or.................

http://www.rcgroups.com/forums/showthread.php?t=1725984

[Make-a-Wake]

There is also a larger one, the size of a 2028, a 56 x 112mm, sold..........uh....................elsewhere.

[Make-a-Wake]

And one more observation....................

here is the non-adjustable kv model of the motor, the 730kv

http://www.hobbyking.com/hobbyking/s...tor_730KV.html

Man, these motors are coming out of the woodwork....................great thing for us. Now "reglar" folks like myself can have big power for a bargain.................and yes I'm aware they arent the quality of a Lehner or Neu.................close enough for me though.

[Brushless55]

Awesome stuff Carl!

[photohoward1]

BTW. 128amps max is a bit low on 750KV. I'm Pushing 175 to 200 on my Nues and Lehners. And a Piece of advice to some newbys. Controllers love "y" winds and struggle on "d" winds.

[Make-a-Wake]

I'm gonna venture that you can set these up to pull 150-180 without issue. I have graphed 240 amp spikes and entire runs of 200+ amps at 10s with my 2028................10+ hp!!

[Brushless55]

BTW. 128amps max is a bit low on 750KV. I'm Pushing 175 to 200 on my Nues and Lehners. And a Piece of advice to some newbys. Controllers love "y" winds and struggle on "d" winds.

I'm gonna venture that you can set these up to pull 150-180 without issue. I have graphed 240 amp spikes and entire runs of 200+ amps at 10s with my 2028................10+ hp!!

and 229amps on 6s gives me about 5000watts (6.8hp) to try out in my DF39
maybe a X452/3 should work good