castle 1512 2650

[Spencer154]

Does anybody make a cooling jacket for a castle 1512 2650 kv motor?

[Spencer154]

I'm planning on putting this motor in miss vegas brushless conversion, does anyone have an idea on what prop i should run with this motor and a seaking 180?

[Alexgar]

Hrc does

[Alexgar]

Check under water cooling parts for motor

[m4a1usr]

Does anybody make a cooling jacket for a castle 1512 2650 kv motor?

You can buy the CC1515 jacket and "notch" it. Use the search function on OSE. I did mine and so have many others. Works perfectly too!

John

[Alexgar]

http://www.offshoreelectrics.com/pro...+Water+Cooling

There is 6 in stock right now

[Spencer154]

thanks guys

[Spencer154]

would a seaking 180 be a good esc for this motor if so what prop should i start with?

[Make-a-Wake]

A T180 should be fine...................thats kind of an "in between" kv in my book....................4s and small prop or 3s and larger prop.

[Alexgar]

i run a cc120 on mine but its the 1800kv version what bout is it going in

[Spencer154]

it was just a thought, was gunna put it in miss vegas conversion. Do you think a 4074 2200 kv would be a better choice?

[Alexgar]

i thinl the cc motor is perfect i had the 1800 version in an elam on 4s and it hauled but so the on 4s and a 538 or 440 should scoot , the leo is far to heavy to stuff in there,the cc1512 was the heaviest i would put in there but that is just my opinion

[Make-a-Wake]

The Leopard 4074 is no where near too big for this hull...................its a 32" hull and it loves a 4074.

Here's a vid I shot of my friends Vegas on 4s, hauls A$$

The 1512 will do fine in it on 4s with an x435-x438.