-
-
You beat me to it=) These are actually TP power motors which seem to be a slightly more refined version of the leopard motor, countersunk case screws and the like. For the money I don't think the is a better 6kw motor I have seen anywhere. Get in quick before the price goes up=P
6BOOST6boost Turbo Manifolds, Australia's number 1 turbo kit specialist and manufacturer
-
That thing is a beast for sure.--10 s on a 5692 wow you could power a 12ft fishing boat with that..Comment
-
That thing is a beast for sure.--10 s on a 5692 wow you could power a 12ft fishing boat with that..Comment
-
The prices are awesome on these!.NAMBA20...Caterpillar UL-1, P-Spec OM29, P-Mono DF33, P-Spec JAE, Aussie 33" Hydro-LSH, Sprintcat CC2028 on 8s, PT SS45 Q Hydro, PS295 UL-1 power, OSE Brothers Outlaw QMono 4-sale, Rio 51z CC2028 on 8s
Comment
-
A couple of things:
1: At 1000 RPM/V this is not a 10S Motor. 40K. Your going to kill something. Controller most likely.
2: At 3.6"x2.2" this is smaller than a Nue 2215 and a Lehner 3060. I doubt this is as powerful as they say.
3: 8S yes or 9S in a hot set-up with a 452 or Bigger if the Motor can handle it. ( Doubt it though) I run a 2215 and a 3060 with a 457 or Larger and
the Motors are Physically bigger.
4: For $80 bucks give it a try.Comment
-
They are the exact same thing as a leopard 5692, which people have data logged on eagle tree to over 7kw and many people have run 35-37krpm on those, the TP motors are supposedly a more refined version of the exact same motor with better bearings and build quality, if they are I don't know but they do have nice countersunk case screws and look to be better quality. Do a search for what people are running on a leopard 5692 and I'm sure you'll find plenty that are driving a 57mm prop. I'll let you know, I have 4 of them coming=)
6BOOST6boost Turbo Manifolds, Australia's number 1 turbo kit specialist and manufacturerComment
-
if it says it can take 10s than I bet it could!
.NAMBA20...Caterpillar UL-1, P-Spec OM29, P-Mono DF33, P-Spec JAE, Aussie 33" Hydro-LSH, Sprintcat CC2028 on 8s, PT SS45 Q Hydro, PS295 UL-1 power, OSE Brothers Outlaw QMono 4-sale, Rio 51z CC2028 on 8sComment
-
They have 5 to choose from....
Nortavlag Bulc Comment
-
Ordered a 5682 1700kv today (along with a 56 mm cooling jacket and a 8 mm to 3/16" coupler from OSE). We'll see what happens?
25" Arrowana with Etti 2970 3300kV. RCMK Flying Cat with twin HOR Outboards. 2 x SSS 4092 2140kV. Faluga 45" with Leo 56110 620 kv on 12s.Comment
-
.NAMBA20...Caterpillar UL-1, P-Spec OM29, P-Mono DF33, P-Spec JAE, Aussie 33" Hydro-LSH, Sprintcat CC2028 on 8s, PT SS45 Q Hydro, PS295 UL-1 power, OSE Brothers Outlaw QMono 4-sale, Rio 51z CC2028 on 8sComment
-
I have no idea, haha. I usually run hulls in the 30" range with 3674's, 4074's and 4082's like everybody else but I suspect a 5682 with a ~50 mm prop will just be way too much to handle for those kind of hulls. When I find the weapon (hull) of choice I'll begin on the slow 'n easy side with a M180 esc and 6s2p (5000 mah 25c) and Prather 225. To be honest - I bought it right away 'cause Hobby King usually add 15-20% on their prices once the sales go up.......or I'm just paranoid with a short memory
I'd really like to try those 3996's too, when they release something suitable for 6s. It just sucks to buy new LiPo's for one type of motor. I think I have 4 of 2s, 4 of 3s, 4 of 4s and 2 of 6s. It has to stop somewhere!
25" Arrowana with Etti 2970 3300kV. RCMK Flying Cat with twin HOR Outboards. 2 x SSS 4092 2140kV. Faluga 45" with Leo 56110 620 kv on 12s.Comment
-
what about the fightercat 41" hull?Comment
-
The specs on the 1000kv 5692 say 40 volts............10s = 42 fully charged..............its a perfect 8s motor. They make a 780kv which would be great for 10s.
http://www.hobbyking.com/hobbyking/s...tor_780kv.htmlNEED PARALLEL CONNECTORS?? QUALITY 5.5MM, 8MM, 8 AND 10 AWG, GET THEM HERE:
http://forums.offshoreelectrics.com/...est!&highlight=Comment
Tweet
Comment