New motor rage from leopard 4092

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • sampit
    Senior Member
    • Jul 2009
    • 447

    #31
    Is this it

    http://www.hobbyking.com/hobbyking/s...90mm_EDF_.html
    FC Cheetah TP4092 1600KV Dinogy 6s2p,Etti Envoy WE 3s, Rico Mono 31" T600 1400kv Dinogy 5100mAh 65c 6s1p
    Popeye Hydro T600 1400kv 6s1p

    Comment

    • sampit
      Senior Member
      • Jul 2009
      • 447

      #32
      forget that, read you post wrong, Leopard site off again to have a look
      FC Cheetah TP4092 1600KV Dinogy 6s2p,Etti Envoy WE 3s, Rico Mono 31" T600 1400kv Dinogy 5100mAh 65c 6s1p
      Popeye Hydro T600 1400kv 6s1p

      Comment

      • sampit
        Senior Member
        • Jul 2009
        • 447

        #33
        1900
        Last edited by sampit; 12-06-2011, 03:19 PM.
        FC Cheetah TP4092 1600KV Dinogy 6s2p,Etti Envoy WE 3s, Rico Mono 31" T600 1400kv Dinogy 5100mAh 65c 6s1p
        Popeye Hydro T600 1400kv 6s1p

        Comment

        • ray schrauwen
          Fast Electric Addict!
          • Apr 2007
          • 9471

          #34
          I can confirm from my past emails with Steve, that they did have a 1900kv unit on the charts at one point. It is gone now. Maybe Steve got dibs on that wind??

          All speculation until he gets them in.
          Nortavlag Bulc

          Comment

          • jkr
            FE Addiction
            • Aug 2010
            • 568

            #35
            I noticed that if we multiply the volts on the kv, none of the motors does not exceed 35000 rpm.
            I think that probably has to do with the bearings!

            Comment

            • fastblack
              Senior Member
              • Nov 2009
              • 119

              #36
              got somw answers form leopardhobby.com

              Hello Sir,

              The max RPM is 45000 under the the max power not over 4200w.

              Best regards!
              Betty

              Leopard Power Model Co.,Ltd



              Hello Sir,

              LBP4092, if you use on boat, it could use 12 cell liipos. But if use on car, we don't suggest you use 12 cell lipos.

              Kindly note, the max volt on our data was test by unload.If load, the RPM will be lower, so could use some higher volt.

              Best regards!
              Betty

              Comment

              • jkr
                FE Addiction
                • Aug 2010
                • 568

                #37
                Good info!

                Comment

                • kievyu
                  Junior Member
                  • Jun 2011
                  • 23

                  #38
                  I want to have leopard 4098 / 1.5y appear ....

                  Comment

                  Working...