Where can I find a cooling jacket for Castle/Neu 1515 1y?

[properchopper]

Any cross-referenced jackets or what else fits the finned can ?

Thanks,

Tony

[driftah]

I used a piece of plexiglas tubing and just drilled some banjo fittings in with some silicone as sealant works awesome and its see through,I will take a pic later.If you cover shipping I can send you a length of the pipe hehe.I used sink drain o rings and it is not as pretty as alum. but is cool lookin too

[properchopper]

I used a piece of plexiglas tubing and just drilled some banjo fittings in with some silicone as sealant works awesome and its see through,I will take a pic later.If you cover shipping I can send you a length of the pipe hehe.I used sink drain o rings and it is not as pretty as alum. but is cool lookin too

Sounds like a good idea. I'd like to see a picture - Thanks !

[electric]

Wow, I was going to tell you OSE has them as I just got my jacket in the mail yesterday, but it appears they sold out in the last few days. Might ask Steve when the next batch is due in?

[Steven Vaccaro]

About a week or so.

[properchopper]

About a week or so.

Good news. I need three - will prepay if I could. ??

[Bduncan]

check the ose store. they are out of stock but I saw one today for a 15151y motor i took out of my trugee to put in a river cat 32

[TheShaughnessy]

http://forums.offshoreelectrics.com/...ket&highlight=

Just realized this is two years old.