Leopard 4082 2200 KV

[jamie]

Does anyone have any data on this motor ie. max amps and voltage .
As it's a custom wind there doesn't seem to be anything about it on their website.
Wondering how much it will take for saw runs only.
Thanks in advance.

[Shaun78]

I used one in my genesis on 5s....ran 56.6 mph

[jamie]

Thanks did you get a current draw or temps ?

[Shaun78]

Temps were 85. Run times not great because of the high kv,amps drawn and high rpms ran. No amp draw meter so no idea

[bbosncali]

23vlts. Very good motor would get better run times on 4s and that 56mph run was litterally about 2 mins I'm sure with a little playing around it could get close to 60mph for a saw run. I have this motor forsale in the wapshop I never even ran it but let shaun78 take it for a quick test run just to see what it would do in his boat. I was going to run it in my mg but finally found a motor I'm very happy with cc1518 so i didn't see a need to try it

[tanasit]

I use the Leopard 4082; 2000KV Brushless Motor w/ Heat Sink from Kershaw Designs, modified to fit the water cool sleeve in the Pursuit.
The numbers are in this format: number of cell; prop; Amp; Watt

6S; M445; 135.82; 2587
5S; M445; 109.07; 1925
4S; M445; 103.99; 1559

6S; M645; 143.43; 2623
5S; M645; 140.91; 2403
4S; M645; 120.51; 1766

Hope this help.

[jamie]

Thanks for that helps heaps