Leopard 4082 2000kv

[Make-a-Wake]

Dont know if anyone has seen this, but for those wanting the 4082 for a 4s setup, this 4082 is 2000kv..............only thing, it has the annoying "sink" pattern that increases dia 2mm. I bet a Castle 15 series water jacket would fit over this as it would only have to clear 1mm per side and the CC motors have the extra fin width as well. Never seen a 4082 in 2000kv.

Thought i'd throw it out here.....................

[Jeff Wohlt]

Get the smooth can. These are for cars.

[Make-a-Wake]

Is there such a thing as a smooth can 4082 2000kv............this is the first 4082 2000kv i've ever seen.

[JackBlack26]

4082 is huge! A Castle motor jacket should work and if it doesn't most Ace hardware stores carry an assortment of bigger or smaller O rings.

[m4a1usr]

Dont know if anyone has seen this, but for those wanting the 4082 for a 4s setup, this 4082 is 2000kv..............only thing, it has the annoying "sink" pattern that increases dia 2mm. I bet a Castle 15 series water jacket would fit over this as it would only have to clear 1mm per side and the CC motors have the extra fin width as well. Never seen a 4082 in 2000kv.

Thought i'd throw it out here.....................

Where did you get the information? That would be cool if available.There is no 4082 in 2000kv per the Leopard web site. There is a 4074 and a 4274, but no 4082. They only goe up to 1500kv. And if you want a 4092, yep,.........there is that size, you can only go up to 1280kv from the last Ebay seller I saw. Although he has not been advertising anymore so they may no longer be available. But the drawings are still available on the Leopard web site.

John

[Make-a-Wake]

Kershaw is selling them

http://cgi.ebay.com/Leopard-4082-2000KV-Brushless-Motor-w-Heat-Sink-/270645588479?pt=Radio_Control_Parts_Accessories&hash=item3f03bbf1ff

[m4a1usr]

Kershaw is selling them

http://cgi.ebay.com/Leopard-4082-200...item3f03bbf1ff

That is way kewl. I have seen KD before and been leery. But I guess he could be a good guy. Thanks!

John

[Make-a-Wake]

Yep, Dan is a good guy!

[iamandrew]

http://www.hobbywing.com/english/ArticleShow.asp?ArticleID=461

Looks pretty similar in design...

[JackBlack26]

Of course the design looks similar. They're made in china!!

[Make-a-Wake]

Not nearly the same motor..................shorter length and only 2 pole............