4s vortex leopard motor

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • sampit
    Senior Member
    • Jul 2009
    • 447
    #1

    4s vortex leopard motor

    Hi,
    Looking for a bit of advise from the hydro guys ,
    I am currently running my Delta Force Vortex on a 2s setup, but would like to go to 4s
    this is my short list for Leopard motors
    I will be running an etti 150A esc and 2x 2s 4000Mah Turnigy Nanos

    Leopard 36/56/2050 (first choice)

    Leopard 36/56/2380

    Leopard 36/74/ 2200

    Leopard 40/74/2000

    Leopard 40/74/2150

    I would be happy with around the 50 mph speed

    Thanks in advance

    Sam
    Last edited by sampit; 10-26-2010, 06:37 AM.
    FC Cheetah TP4092 1600KV Dinogy 6s2p,Etti Envoy WE 3s, Rico Mono 31" T600 1400kv Dinogy 5100mAh 65c 6s1p
    Popeye Hydro T600 1400kv 6s1p
    Tags: None
    • sampit
      Senior Member
      • Jul 2009
      • 447
      #2
      Bump!
      FC Cheetah TP4092 1600KV Dinogy 6s2p,Etti Envoy WE 3s, Rico Mono 31" T600 1400kv Dinogy 5100mAh 65c 6s1p
      Popeye Hydro T600 1400kv 6s1p

        Comment

        • CornelP
          Senior Member
          • May 2009
          • 745
          #3
          For a boat that size, I would ditch the 40xx from the list, waaaay too big. Your choice is probably the best, lower amp draw than the others.
          Honestly, I would go for the 3656 BUT make sure there is enough room for he 3674. This is what i did on my Intruder: install the 4074, but make room for a Feigao 580 :D

            Comment

            Previous template Next
            Working...