swordfish 220 a pro with data logger

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • nitrous8e
    Member
    • Dec 2011
    • 30

    #1

    swordfish 220 a pro with data logger

    i have a swordfish 220 amp pro with data logger i am using the lcd program box i can't seem to be able to set the lvc to a higher rate than 2.9 i want to set it 3.0+
    i must be missing something on the lcd box setttings or where to find more settings
  • jim82
    Fast Electric Addict!
    • Jan 2013
    • 1358

    #2
    rather then relying on lvc because higher quality lipos are going to react different and you may run them below 20%, start timing your runs with your setup and you will know when its time to bring her in

    Comment

    • nitrous8e
      Member
      • Dec 2011
      • 30

      #3
      Originally posted by jim82
      rather then relying on lvc because higher quality lipos are going to react different and you may run them below 20%, start timing your runs with your setup and you will know when its time to bring her in

      still would like to know where in the prgram menu all of the lvc setting can't find them above 2.9

      Comment

      • montymike
        Senior Member
        • Jul 2012
        • 774

        #4
        Were is ur cell count set ? Set on auto from factory
        Try setting to the amou
        nt of cells ur goung to run then then set ur lvc

        Comment

        Working...