SK180 v3 vs. Swordfish 220+

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Kaotic
    Senior Member
    • Jul 2014
    • 447
    #1

    SK180 v3 vs. Swordfish 220+

    Sorry if this has been asked before. I did a search and didn't find what I was looking for. I'm currently running a 6s setup with kind of a higher than normal KV motor with a SK 180v3. Would it be safe to upgrade to the SF 220+ or can this SK180 handle the load??

    I've run this setup a couple times and my temps where below 95' but that's in 45 degree weather.
    Michigan Fast Electric SAW Club
    Revolt - 76.9mph...Building a DF35- Project Mono
    Tags: None
    • olwarbirds
      Magic Smoke Wizard
      • Oct 2012
      • 1136
      #2
      Whats higher than normal...I use the T180 in several 2200kv 6S setups with no issues...
      Tunnels-PS295. Cats-H&M M1 Supercat Daytona rivercat. Monos-DF Cyberstorm HiTech 29. Hydros- Ms K Vac-U-Pickle Custom built 37" shovel 10th scale converted to FE Shadow. Rigger-H&M Evo II. AQ Harbortug recovery boat. Build in progress 37" cf Dragboat

        Comment

        • msundsd5
          Msundsd Racing/ COE
          • Nov 2013
          • 244
          #3
          The T180 is a beast ESC, Dag on right it will handle it...... Absolute BEAST!!!
          Lot Boyz Racing and Marine Team...Get Hype!
          CF Shocker Twin - 93.4mph / CF Daytona Single - 80.2mph
          FG Shocker Single - 98.3mph / Miss Geico 24" Single - 72.3mph

            Comment

            • Kaotic
              Senior Member
              • Jul 2014
              • 447
              #4
              Ok cool. I kinda was looking for an excuse to get an ESC with data logging but I'd rather have an ESC that's going to hold up instead.
              Michigan Fast Electric SAW Club
              Revolt - 76.9mph...Building a DF35- Project Mono

                Comment

                • olwarbirds
                  Magic Smoke Wizard
                  • Oct 2012
                  • 1136
                  #5
                  I hear ya, I have a couple castles with logging. Use them to find best setup, then put in the T180 with added capbanks. I sure do wish Hobbywing would make one with logging....
                  Tunnels-PS295. Cats-H&M M1 Supercat Daytona rivercat. Monos-DF Cyberstorm HiTech 29. Hydros- Ms K Vac-U-Pickle Custom built 37" shovel 10th scale converted to FE Shadow. Rigger-H&M Evo II. AQ Harbortug recovery boat. Build in progress 37" cf Dragboat

                    Comment

                    • kfxguy
                      Fast Electric Addict!
                      • Oct 2013
                      • 8746
                      #6
                      Just get an external logger. The t180 is a bad mofo....
                      32" carbon rivercat single 4s 102mph, 27” mini Rivercat 92mph, kbb34 91mph, jessej micro cat(too fast) was

                        Comment

                        • Kaotic
                          Senior Member
                          • Jul 2014
                          • 447
                          #7
                          I've thought about buying one of those eagle trees but can't justify there cost. It would be cool if hobbywing came out with a 250a ESC that had the same reputation as the 180.
                          Michigan Fast Electric SAW Club
                          Revolt - 76.9mph...Building a DF35- Project Mono

                            Comment

                            Previous template Next
                            Working...