swordfish 220/300a lvc no protection setting

[nitrous8e]

I am using a Swordfish 220/300A 2-6s ESC with bec on 4s2p how do i set the LVC to " no protection" . the program INSTRUCTION sheet shows
LVC AUTO ---- 5.0 V 6.0V 7.2V 8.4V 9.V 12.0V as choices suggestion please! i do have the V-S program box ...

[flraptor07]

I thought you could turn it off but I just looked and you can't, I'd set it at the lowest setting and time your runs. You'll have to do some testing to see how long it takes to get the packs down to what you're shooting for. I don't know what else to tell you, unless somebody else knows a way to turn it off.