swordfish 240hv esc

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • bigfol
    Junior Member
    • Feb 2011
    • 3
    #1

    swordfish 240hv esc

    So I have this esc all hooked up and ready to go, tried to calibrate the throttle and this is whats happing,pulled the trigger to full throttle as directed by the manual after hearing the 3 beeps, should have sounded 4 more beeps, but got nothing, when i released the trigger to the neutral postion the motor is at full throttle, when i pull the trigger to full throttle i get neutral,It hooked up to a neu 1527 1500kv motor, I using a the latest 2.4GHz Tx AND Rx from traxxas, I have tried adjusting end points and servo reverseing without any luck, anyone got any ideas???????
    When all else fails read the instructions.....
    Tags: None
    • Diesel6401
      Memento Vivere
      • Oct 2009
      • 4204
      #2
      Originally posted by bigfol
      So I have this esc all hooked up and ready to go, tried to calibrate the throttle and this is whats happing,pulled the trigger to full throttle as directed by the manual after hearing the 3 beeps, should have sounded 4 more beeps, but got nothing, when i released the trigger to the neutral postion the motor is at full throttle, when i pull the trigger to full throttle i get neutral,It hooked up to a neu 1527 1500kv motor, I using a the latest 2.4GHz Tx AND Rx from traxxas, I have tried adjusting end points and servo reverseing without any luck, anyone got any ideas???????
      Did you adjust the throttle trim or is that what you are calling the end points? I had a problem with the 120 doing the same thing and after I turned the throttle trim full clockwise and redid the throttle calibration it worked great for me.
      - Diesel's Youtube
      - Diesel's Fleet
      "It is easier to be wise for others than for ourselves"

        Comment

        • bigfol
          Junior Member
          • Feb 2011
          • 3
          #3
          I will have another look at the throttle trim settings thanks for the info, I let you know how it goes.
          When all else fails read the instructions.....

            Comment

            • Diesel6401
              Memento Vivere
              • Oct 2009
              • 4204
              #4
              Originally posted by bigfol
              I will have another look at the throttle trim settings thanks for the info, I let you know how it goes.
              Hopefully it works, trust me I know it can be a pain in the butt lol...


              to OSE by the way!
              - Diesel's Youtube
              - Diesel's Fleet
              "It is easier to be wise for others than for ourselves"

                Comment

                • bigfol
                  Junior Member
                  • Feb 2011
                  • 3
                  #5
                  Diesel your the man, worked a treat, had to turn back the throttle trim nob counter- clock wise on the tx and re-calibrated,still trying to work out this new Traxxas 2.4GHz tranny with its muti knob and all the rest of it....... I guess when all else fails read the instructions..LOL

                  Thanks for the welcome too...
                  When all else fails read the instructions.....

                    Comment

                    Previous template Next
                    Working...