Swordfish Pro2 240HV - Adding Cap Bank - Anti-Spark Wire

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Pennstater
    Member
    • Sep 2015
    • 70

    #1

    Swordfish Pro2 240HV - Adding Cap Bank - Anti-Spark Wire

    I'm adding a cap bank to my ESC. The SF has a separate wire for the ant-spark lead right next to the main battery wire (see attached picture).

    When adding the cap bank, I assume that this anti-spark wire should also be soldered to the cap bank (if not, then I would suspect there would be a big spark when the battery connection is completed as the cap bank instantly charges).

    Is this correct?

    Thank you,
    Pennstater

    IMG_20180227_221953.jpg
  • srislash
    Not there yet
    • Mar 2011
    • 7673

    #2
    Just solder it to the bullet. It then will feed the caps. That is it’s job. It slowly feeds the caps to full instead of the caps just filling themselves with a big ‘SNAP’ when you connect battery. Also a good idea to move it over to the negative side. Easier on electronics this way(thanks Craig,lol).

    Comment

    Working...