ESC Selection

[Curtis Canton]

Good ever I got guys.

Unfortunately my castle 220 ESC burnt up today. It was used but luckily everything else survived. I need help finding a good replacement. I am running 4s in parallel with a neu 2500kv. Thank so in advance.

[Fluid]

We need more info:

- exactly what boat
- exactly what motor
- exactly what packs
- what use: zip zip, SAW runs, oval racing, etc.
- how much are you willing to spend?

With more info we can give you better recommendations.


.

[Curtis Canton]

I am running a Rico 33" mono
Oval racing
Nano tech 5000mah 5.0 (if there is a better option let me know)
Boat was bought with motor but it appears to be a neu 1527.
Price is not an issue as I want to be able to have good reliability.
I run gas in my district and am new to electric so I'm like a sponge with taking in information.
Just started getting electric going in our district. I actually had to run with 20 monos this weekend but have no one really has the knowledge in electric. A few guys have some boats on order.

[T.S.Davis]

MGM Compro
TMM 25035-3 for Race Boats X2-SERIES

[Curtis Canton]

Excellent. Thank you sir

[meangenesracing]

MGM Compro
TMM 25035-3 for Race Boats X2-SERIES

how much do they cost? where do you get them?

[T.S.Davis]

There pretty darned expensive to be honest. Shipping alone is nutty. I don't think anybody actually stocks them state side.

https://www.mgm-controllers.com/cars/speed-controllers-escs

[BrianW]

Curtis
call me 407-913-0590

Brian

[dmitry100]

TS Davis, wouldn't MGM 280/26 be a better option, or do you like the 25035's better?

[T.S.Davis]

Probably would. Might be a little cheaper too. The 35 is just handy if you build another boat that wants more battery later.

[RaceMechaniX]

MGM controllers and Neu motors do not always work well together. Especially Delta wind motors.

[Curtis Canton]

Ok. I'm new to electric so any suggestions would be appreciated

[dmitry100]

So then Swordfish 220 probably would be good... (The Swordfish 300 Lite would probably would be too big... forgot it's only 33")

[Curtis Canton]

Excellent! Thanks again

[dmitry100]

http://www.offshoreelectrics.com/pro...d=hef-HB60220L
http://www.offshoreelectrics.com/pro...d=hef-HB61220L

Guys... where are the SF220's with the 300amp burst? Or are they the same thing...