Tweet
I am twining the genesis boat and I have run into a problem.There are two 3674 leopard motors 2200kv.2 turnigy 90amp esc.How do I set this up?;I know you have to cut the red wire on one esc.The connectors by what I was told is to join both white wires and both black wires ;and leave one red wire off.I did all this and when I hooked it up to try to run,nothing happened.I am not a great person with electronics,thats why I have curly hair
Hopefully some one can steer me in the right direction. Thanks
Al
Hopefully some one can steer me in the right direction. Thanks
Al