Hi there, I have question as to what Amp of ESC this Turnigy 500 H3126 1600Kv motor would ask for at full power. I see on HobbyKing recommended 70A ESC. But is the demand alot higher in a boat than a copter?
I am wondering if anyone could give me some advice. I am new and building a hydro. What would you guys think this Turnigy 500 H3126 1600Kv would ask for in a 31" long 16" wide hydro?
The batteries used are 2 x 5000mah 5s 30C batteries. Being it is twin motor with water cooled mounts.
The props I am using are either a X640 type or X440 with solid shaft drive.
Any advice would be great so I do not create a speeding fireball on the water
Thanks all!
I am wondering if anyone could give me some advice. I am new and building a hydro. What would you guys think this Turnigy 500 H3126 1600Kv would ask for in a 31" long 16" wide hydro?
The batteries used are 2 x 5000mah 5s 30C batteries. Being it is twin motor with water cooled mounts.
The props I am using are either a X640 type or X440 with solid shaft drive.
Any advice would be great so I do not create a speeding fireball on the water

Thanks all!
Comment