Turnigy Monster ESC 200 amp

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • CharlieBucket
    Member
    • Nov 2010
    • 71
    #1

    Turnigy Monster ESC 200 amp

    I picked up a Turnigy HV Monster ESC 200 amp for a build I am currently on, and the guy I picked it up from said it was bench tested but never used. There are water lines installed, and also it looks like he tried to epoxy the base of the caps. Is this an attempt to waterproof this ESC? Has anyone done this or have used it in a boat?
    I've looked around a bit but haven't found much of anything on these ESC's and waterproofing.
    Tags: None
    • Make-a-Wake
      FE Rules!
      • Nov 2009
      • 5557
      #2
      If you are referring to the Monster 240a Aquastar, its a swordfish...................or vice versa.

      EDIT...............i see you are referring to the "land" 200a ESC, dont know about it.
      NEED PARALLEL CONNECTORS?? QUALITY 5.5MM, 8MM, 8 AND 10 AWG, GET THEM HERE: http://forums.offshoreelectrics.com/...est!&highlight=

        Comment

        • CharlieBucket
          Member
          • Nov 2010
          • 71
          #3
          This is exactly what I have, other than the modifications he made to it.


          http://www.hobbyking.com/hobbyking/s...dProduct=10332

          I'm curious if I should even put it in the boat. He said he has used them in the past on a few of his without any problems, but I just don't know.

            Comment

            Previous template Next
            Working...