ETTI 150 Race ESC

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • m4a1usr
    Fast Electric Addict
    • Nov 2009
    • 2038
    #1

    ETTI 150 Race ESC

    Anyone know what the jumper is for on the logic board for the RACE/non BEC version? I want to add some heat shrink on mine and it will cover up the jumper but before I go there I figured I'd ask. Theres nothing in the instructions I have stating what the jumper is for.

    John
    Change is the one Constant
    Tags: None
    • FE Wannabe
      Senior Member
      • Jul 2007
      • 626
      #2
      John,
      If the jumper you are referring to is the two pins towards the middle of the ESC, I believe it is the output for connecting the RPM sensor cable to the ETTI power analyzer.
      SoCal Fast Electrics|H&M Drifter S-CC1512/4S/T180A|Aeromarine Scorpion 32"- UL-1/4S/HM200A|Insane 34- CC1515 1Y/4S2P/T180A|BK Bandit S-CC1515 1Y/4S2P/T180A|Insane FE30 UL-1/4S/ETTI 150

        Comment

        • m4a1usr
          Fast Electric Addict
          • Nov 2009
          • 2038
          #3
          Ahh yes! I bet your right Brad. Kewl. Thanks. Now I can get back to reconfiguring the DF with the ETTI.

          John
          Change is the one Constant

            Comment

            • FE Wannabe
              Senior Member
              • Jul 2007
              • 626
              #4
              No problem John.
              Actually I know that is what that is first hand. I have the power analyzer with rpm feed connected to my ETTI 150.
              I have been a little gun shy of stating absolutes lately.
              don't want to get flamed!
              Glad to be of assistance.
              Brad
              SoCal Fast Electrics|H&M Drifter S-CC1512/4S/T180A|Aeromarine Scorpion 32"- UL-1/4S/HM200A|Insane 34- CC1515 1Y/4S2P/T180A|BK Bandit S-CC1515 1Y/4S2P/T180A|Insane FE30 UL-1/4S/ETTI 150

                Comment

                Previous template Next
                Working...