150 etti ESC Configuration

[mickieb49]

Hello All,
Can anyone shed some light on the wiring for a Capacitor bank to the ESC?

There is a plug point on the ESC with 2 wires, is this the connection point?

Thankyou for your input.
Mick

[soliverg]

Here is an install picture.
http://www.offshoreelectrics.com/pro...tti-caps-3.jpg
As close to the esc as possible.


Cheers

[mickieb49]

Ok thanks, this changes the setting up considerably
Any idea's on what the extra 2 wire pin plug is for then?

Thanks
Mick

[soliverg]

I believe its an RPM sensor. But it must use the ETTI Power analyser to work. I havnt used it but it would be good to know the Revs of the motor to se if your pushing it too hard.

Cheers