Turnigy 180 marine inside Apparition?

[GP73]

Has anyone managed to fit a T180 inside an Apparition?

It doesn't look like it can fit, unless you reposition the cap horizontally... and possibly the wires too...

Am I missing some other option?

[FighterCat57]

Has anyone managed to fit a T180 inside an Apparition?

It doesn't look like it can fit, unless you reposition the cap horizontally... and possibly the wires too...

Am I missing some other option?

Yep. Fits in front of the motor, slightly under the hatch. Had some photos in "Project Apparition" thread.

Also, you can re-solder the leads on the ESC at a 90 degree angle. Works like a charm.

[GP73]

Yep. Fits in front of the motor, slightly under the hatch. Had some photos in "Project Apparition" thread.

Also, you can re-solder the leads on the ESC at a 90 degree angle. Works like a charm.

Thanks! I'll check the pics, I'm assuming you need to remove the tray...

[FighterCat57]

Thanks! I'll check the pics, I'm assuming you need to remove the tray...

Yeah, I just used a bit of silicone under the ESC to keep it in place. Worked great and was easy to remove when the time came.