Castle BEC

[Gary]

Anyone ever run a Castle BEC with the Hydra 240 HV ? The online directions show to dissconect the red wire on the ICE controllers but nothing about the HV Hydras. I know you need the red wire attached on the HV models. Just asking before i put one in. Thanks

[BHChieftain]

Anyone ever run a Castle BEC with the Hydra 240 HV ? The online directions show to dissconect the red wire on the ICE controllers but nothing about the HV Hydras. I know you need the red wire attached on the HV models. Just asking before i put one in. Thanks

I run that config. I just cut the middle (red) wire on the Hydra reciever connector and wired in the bec onto the pos/neg battery lead hydra connectors.

See post #28 on my syncron build thread for some pics:
http://forums.offshoreelectrics.com/...hlight=syncron


Chief

[ENCORE MAN]

bec

I run that config. I just cut the middle (red) wire on the Hydra reciever connector and wired in the bec onto the pos/neg battery lead hydra connectors.

See post #28 on my syncron build thread for some pics:
http://forums.offshoreelectrics.com/...hlight=syncron


Chief

I never cut the red wire on an ESC. in case you decide to sell it at a later date. I use a servo extension and cut the red wire in the extension and your expensive ESC. is still intact. BG: