need a goog charger for high end batts

[Jcarlton]

im looking for a good charger for ib3600,3800 and novak 3300 matched batteries ! any sugestions or what your using id like to know! thanx !!:)

[avengersteve]

im using the duratrax ice , and love it. charging IB 3800 6cells, and IB 3600 7 cell packs... Steven has the best price for them that ive seen here on ose

[Eyekandyboats]

electrify triton 2
Astro 112D/X

[avengersteve]

ive heard good things about the triton jr also... not as many features, but cheaper... you will still need a powersource tho...

[SweetZ28]

team checkpoint better than ice www.temcheakpoint.com

[saleens7]

i think you misspelled it

you mean www.teamcheckpoint.com ?

[RMZDADDY]

Electrifly Triton, up to 24 cells, very happy with it.

[JimClark]

how many cells do yo run?
Jim

[Jcarlton]

im getting 2 6 cell ib integy 3800 packs , 3 3300 novak 6 cell , but im running them in series . is that bad ? my m tronics esc says 12 cell cap.

[NorthernBoater]

If you are only running two packs at a time in series then you are fine. I have the Triton charger and I have no complaints. The Triton 2 is what replaced it.

[Fluid]

Frankly, it is hard to beat an Astro 110 Deluxe. Not a lot of features that you don't need, just plug and play. Up to 24 cells too.

You can run packs in series, but only packs made from the same cells. You can't mix 3600s and 4200s for example. It is best to charge them as a single pack, but you can get away with charging them as three individual six packs.



.

[sjslhill]

Yup....

I was thinking the same thing..... We have them in stock.

Frankly, it is hard to beat an Astro 110 Deluxe. Not a lot of features that you don't need, just plug and play. Up to 24 cells too.

You can run packs in series, but only packs made from the same cells. You can't mix 3600s and 4200s for example. It is best to charge them as a single pack, but you can get away with charging them as three individual six packs.



.

[Mich. Maniac]

speaking of batteries, so can you solder deans to battery leads or I thought you werent suppose to solder to batt leads? please help me on this one. I wanna switch everything over to deans.

[sjslhill]

Yes you can solder deans on to battery leads.

[Jcarlton]

sure actually thats the only and best way ! the solder has lead and tin in it plus its adhesive . plus they give you shrink wrap the leads . definatly recommend it !!