Boat Died....Need help

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Xcessive Carts
    Member
    • Sep 2014
    • 99

    #1

    Boat Died....Need help

    Heres what happened today, it was the 4th run on a new HobbyKing Relentless all stock.
    Running 4s 2200 40c battery. After about 3 minutes of a great run, I came out of a turn at 1/2 throttle, pulled the trigger and it just died. I recovered it, took the lid off. Dry inside, Nothing was really even warm, no smoke, no burnt smell. Tried a different battery. Nothing, no beeps, no power to Motor or Steering Servo. Need some input here.
  • gearhd48
    Senior Member
    • May 2015
    • 139

    #2
    What it's worth, Not sure which HK ESC you have but recheck connections, Then test system with a different ESC with it's voltage recommendations. I think your ESC puked.
    SW26 V3 Green 35mph , Swifter Hydro 26. Delta Force 35. cars ,3 Rustlers 45-76 Mph.

    Comment

    • Xcessive Carts
      Member
      • Sep 2014
      • 99

      #3
      I took the reciever out of bag, it was damp. Plugged battery in and noticed the red led is blinking twice in a cycle.
      The receiver is a Assoiciated RC, TRS-402-SSi 4 channel. DOnt have the manual for the TX or RX. Anybody know what that 2 blink code means?

      Comment

      • Xcessive Carts
        Member
        • Sep 2014
        • 99

        #4
        Tried to bind the TX and RX. Rx will not go into bind mode which is Red/Green flashing, just stays Red 2 flash mode. I think it is a goner

        Comment

        • gearhd48
          Senior Member
          • May 2015
          • 139

          #5
          Sorry but can't help with that one. It was the RX or ESC, now we know it's the RX. Best of luck
          SW26 V3 Green 35mph , Swifter Hydro 26. Delta Force 35. cars ,3 Rustlers 45-76 Mph.

          Comment

          • Xcessive Carts
            Member
            • Sep 2014
            • 99

            #6
            Problem Solved

            Originally posted by Xcessive Carts
            Tried to bind the TX and RX. Rx will not go into bind mode which is Red/Green flashing, just stays Red 2 flash mode. I think it is a goner
            Replaced the receiver. All back to normal.

            not sure why my post was moved to battery forum, it was never about battery issues.

            Comment

            Working...