Running in new packs. Discharging them!

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Mad Racer
    Senior Member
    • Nov 2013
    • 140

    #1

    Running in new packs. Discharging them!

    Just curious what you do.

    The experienced masters of FE at my club say for the first cycle run at half throttle for 30%. So 70% capacity left. Charge again and run to 50% with a few bursts of WOT . Next run same again with slightly longer WOT to 40%.

    Then your packs will be conditioned for high amp draw.

    I always charge at 1C .

    I don't know much in this area but it sure can't hurt the packs running them in .
  • Brushless55
    Creator
    • Oct 2008
    • 9488

    #2
    not sure if it really helps but I do charge for the first 5 cycles at 1C
    discharge for 2 cycles at 1C, down to 40% left
    discharge a 3rd cycle at 2C down to 35% left
    discharge on the 4th cycle at 5C down to 30ish % left
    then discharge on the 5th cycle at 10C to about 40-50% left
    then put them in storage charge till race day, or I go flying
    .NAMBA20...Caterpillar UL-1, P-Spec OM29, P-Mono DF33, P-Spec JAE, Aussie 33" Hydro-LSH, Sprintcat CC2028 on 8s, PT SS45 Q Hydro, PS295 UL-1 power, OSE Brothers Outlaw QMono 4-sale, Rio 51z CC2028 on 8s

    Comment

    Working...