has anyone used lipo paraboards for charging ?

[Jcarlton]

hello all just purchased the hitec x-1 touchscreen charger . has anyone ever used the lipo parallel charging boards for multiple pack charging ? or can i even use it with my charger ? have purchased 2 dynamite 3s 5000mah lipos and was wondering if they could be charged at the same time with this board ? im a nitro guy and just getting in the lipo scene . im running in a boat with a 2636KV motor and a 50 amp esc . any insight or input would be greatly appreciated .

[785boats]

Nothing wrong with parallel charging at all. It's my preferred method.
Paraboards are fine if the connectors match the ones on your packs.

One thing to be aware of though. ALWAYS!!! connect the main charging leads first. Then the balance leads.
It is best if the two packs are pretty close in voltage before connecting together.
If they are not, just let them sit for a while after you have connected the main leads until the voltages are close. Then connect the balance leads & start the charge.