pursuit battery placement

[lenny]

What you should do is use some aquarium silicone sealant,
To hold stuff in place like the trays and mounts.
That way it can give a little bit of movement and handle the torque forces of a crash better.


First run on any new setup 1 minute and check everything over,
And than move up on run times from there.

On my boat with a 6s 40c 5000mah pack and trimmed out for high speed runs,
I will get about 5 minutes maybe more.
Look at my video's and see how I run the boats,
Every one drives a little different than the next guy so it can very.
A trimmed out boat and setup makes a big difference in speeds and run times.

[pugman2]

thought of using singles seen turnigy 6s 8000mah thought it might be a compromise on weight and hull stress. has any one here used one of these

[T.S.Davis]

I have 3 Pursuit. It's not enough boat for 6s. Only my opinion though.

[Peter A]

Have to agree, if you are doing a 6s 2p, a bigger hull would be better. The pursuit can be fast (and fun) on 4s but the size of the boat has limits.

I have 3 Pursuit. It's not enough boat for 6s. Only my opinion though.

[pugman2]

what about 5s?

[pugman2]

ran boat this weekend with batts in center cradle on 4s with a x447 prop with the 4074 1800kv motor wow was I surprised don't think I would want to go 6s thinking gonna run 5s this thing flies and handles well ran for 3 min was cool couldn't run any more had to fix a water leak only issue so far

[srislash]

I have been surprised at the runtime on these. Glad all went well