I've been lurking for a while ever since seeing a MG24 at the LHS. Since all my r/c stuff is still at my house 2000mi away (I'm living at my SIL's), I figured this would get me up and running in one shot. I went ahead and got a 7-cell NiMh and the Por Boat Stainless prop before I put it in the water. I ran it at my cousin's pond during Christmas and was OK with it's performance (with the 7cell pack anyway), but I only had 1 pack. Noticed that the ESC had a LiPo switch so we ran his 7.2V car packs which had similar performance to the 7cell NiMh. On the last run before putting it away, I guess I let the smoke out of the wires. It still ran, but it was smoking. Decided to start with a brushless conversion.
I ended up getting this 3660 1700KV motor:
http://www.hobbyking.com/hobbyking/s...ess_Motor.html
and this 100A ESC with a 5a BECL
http://www.hobbyking.com/hobbyking/s..._w_5A_BEC.html

The adapter coupling from OSE is on order.
I got a gift certificate to my LHS for Christmas and was wondering which pack would work for this setup?
I ended up getting this 3660 1700KV motor:
http://www.hobbyking.com/hobbyking/s...ess_Motor.html
and this 100A ESC with a 5a BECL
http://www.hobbyking.com/hobbyking/s..._w_5A_BEC.html

The adapter coupling from OSE is on order.
I got a gift certificate to my LHS for Christmas and was wondering which pack would work for this setup?
Comment