Tweet
Hi all,
Just coming into the hobby and really working at learning about it after some years of just messing around with store bought rtr. My limited experience has been with an Astroflight charger and power supply and I find myself looking for more- want to charge more packs at one time and balance to higher tolerances. While I have 4s and 6s packs now(5000mAh), I am considering 8s packs in the future and would like a changer -and power supply- that can go to that level.
I am open to suggestions and am considering the Thunder Power 820C charger as it has duel charging ability and can go up to 8s packs.
I am in a bit of an unknown at this point looking for a power supply. It seems that I could obtain two Thunder Power 1527PS (100-200V AC input, Dual 15v/300W 27V/550W DC Switchable Output, 1.0A) and run them in parallel and have adequate power.
Of course I could be completely wrong about this and hence seek advice from the forum and suggestions.
thanks
Sorry- just realized that plpflyboy is going the same direction I seem to be- still would like suggestions or thoughts on 2 TP1527PS in parallel or a better option-
Just coming into the hobby and really working at learning about it after some years of just messing around with store bought rtr. My limited experience has been with an Astroflight charger and power supply and I find myself looking for more- want to charge more packs at one time and balance to higher tolerances. While I have 4s and 6s packs now(5000mAh), I am considering 8s packs in the future and would like a changer -and power supply- that can go to that level.
I am open to suggestions and am considering the Thunder Power 820C charger as it has duel charging ability and can go up to 8s packs.
I am in a bit of an unknown at this point looking for a power supply. It seems that I could obtain two Thunder Power 1527PS (100-200V AC input, Dual 15v/300W 27V/550W DC Switchable Output, 1.0A) and run them in parallel and have adequate power.
Of course I could be completely wrong about this and hence seek advice from the forum and suggestions.
thanks
Sorry- just realized that plpflyboy is going the same direction I seem to be- still would like suggestions or thoughts on 2 TP1527PS in parallel or a better option-