4 lipo parallel wiring diagram help

[battlefury]

Hi guys i am looking to make a wiring harness for 4s4p

which of these is correct?

A or B?


A
Part A.jpg


B
part B.jpg

[bwells]

Something is definitely wrong with A, B looks good as long as the packs are 4s, but wait for more input! What kind of run time are you looking for?

[oscarel]

Assuming packs are 4s, A would be 8s2p and B would be 4s4p.

[battlefury]

Something is definitely wrong with A, B looks good as long as the packs are 4s, but wait for more input! What kind of run time are you looking for?

I w be using 15271d spinning m447 with 4 x 5000mah packs So probably I will shooting for 5mins, 7 Mins tops. I will measure the packs after one run to check on juice left.

[siberianhusky]

Look again A is nothing! You have to complete the circuit. You have the + of one pair and the - of another pair connected to the esc.
The + and - terminals of BOTH pairs of batteries must be connected to the esc to have a complete circuit. Then both would be 4s4p setups.
No idea where somebody gets 8s out of that! Nothing is even in series!

[dana]

B looks rite

[Make-a-Wake]

A will just add weight and give no power......................none

B is right assuming they are 4s packs

[bruceisla]

B is correct

B is correct .... as mentioned, A is not a complete circuit and current will not flow.

[bruceisla]

A will just add weight and give no power......................none

Yup .... excellent ballast !!

[battlefury]

Great stuff thanks for e input guys

[oscarel]

You are correct! the +'s are paralleled and connected to nothing.

Look again A is nothing! You have to complete the circuit. You have the + of one pair and the - of another pair connected to the esc.
The + and - terminals of BOTH pairs of batteries must be connected to the esc to have a complete circuit. Then both would be 4s4p setups.
No idea where somebody gets 8s out of that! Nothing is even in series!