2S for 6v receiver

[FRED]

I'm like Jeff on 9v and never has a problem on am.---- Now i use 4AA but wired in saddle packs for boat balaance and use 2 sets a year.

[LiPo Power]

I use this, love it!!!

http://www.hobbyking.com/hobbyking/s...idProduct=4319

[carlcisneros]

those are basically the same regulators I use.
They work great.

[FRED]

Now on HK, their UBEC in their discussion section are getting bad ratings. Maybe operator error as i read and yet the GURUS here seem to do alright. Now experience is the KEY. Poster on here says to leave subject alone. NOT really as a boater wants reliable parts for his boat. HK has a * note saying it is not the original as we need reliable 6 volts consistent, Make-A-Wake- your posting on 6.6 volt unit; the extra volt, will it harm servos like Fub, 3003 which reads 4,5-6 volts. just inquiring, I did like Jeff w, for years on am, but with lipos is a different arena.

[drwayne]

If you have concerns of voltage compatibility, 'everything' runs AOK on 6V.
Run 6V ubec

W