RX Battery purpose

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • worriedsick4u
    Senior Member
    • Dec 2011
    • 693

    #1

    RX Battery purpose

    I have been reading alot of threads but nobody has posted the purpose of a rx battery. Advantages and disadvantages?
  • Fluid
    Fast and Furious
    • Apr 2007
    • 8011

    #2
    Until recently the BEC on most ESCs was noisy and could cause problems with radio reception. I used a receiver battery for 20 years and had no such problems. But recent stand-alone BECs, and some BECs that are included in some ESCs are very good and preclude the need for a battery. Combined with the new 2.4 radios these eliminate the risk. I have had zero receiver issues with the Castle ICE controllers I've been running for about two years.

    OTOH, some BECs don't deliver much in the way of amps, and if you are running a big servo or a digital one you need to make certain the BEC can deliver a minimum of 5 amps. If not, use a 5-cell NiMH receiver pack of at least 1400 mAh capacity or a 7.4 volt 800 mAh capacity LiPo pack. Either needs to have large gauge wire.



    .
    ERROR 403 - This is not the page you are looking for

    Comment

    • Punisher 67
      Ignore list member #67
      • May 2008
      • 1480

      #3
      I have used the Turnigy high volt / high amp bec now for the 3rd season on 3 boats and not a single issue ever - I am done with reciever batteries on anything
      Necessity is the mother of invention.............

      Youtube Video's http://www.youtube.com/user/Titanis2000

      Comment

      • worriedsick4u
        Senior Member
        • Dec 2011
        • 693

        #4
        Thanks for clearing that up. No rx

        Comment

        Working...